Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Fig. 11.7 Effect of the xylan content originating from acid

Читайте также:
  1. Acid side chains. The glycosidic bond between uronic acid and the xylan backbone
  2. Combined PS and Anthraquinone (AQ) Effects
  3. Compare the advantages and disadvantages of three of the following as media for communicating information. State which you consider to be the most effective.
  4. Content is almost negligible. Therefore, the main objective of the alkali
  5. Content, indicating the fragmentation of microfibrils. Clearly, temperatures
  6. Contents
  7. Contents

Sulfite and PHK pulps on yellowness coefficient of diacetate

solution [17,19]. For pulp acetylation, see Fig. 11.6.

Moreover, the higher molecular weight of the kraft xylan as compared to the

Sulfite xylan gives rise to a higher yellowness coefficient. It has been assumed that

The diacetate color is caused by undissolved particles in the size range of 1 lm,

since centrifugation eliminated both color and fiber fragments [21].

The yellowness of the cellulose triacetate solution is also closely related to the xylan

Content of the initial pulps, and again, at equal xylan content, the PHK pulps reveal a

Higher yellowness coefficient than the corresponding sulfite pulps (Fig. 11.8).

These findings agree with the results reported by Conca and associates, who

Showed that xylans of low uronic acid content gave poor acetate solution properties

[23]. Later, Wells and coworkers [24], as well as Gardner and Chang [25], con-

Pulp Properties and Applications

0 1 2 3 4 5

0.0

0.2

0.4

0.6

0.8

1.0

HW-, SW-PHK SW-Acid Sulfite Eucalyptus Acid Sulfite

Yellowness Coefficient

Of Triacetate

Xylan content [%]

Fig. 11.8 Effect of xylan content originating from acid sulfite

And PHK pulps on yellowness coefficient of triacetate solution

[22]. Pulp acetylation according to the low-catalyst process

using 0.3% sulfuric acid catalyst based on initial amount of

Cellulose.

Firmed the poor acetylation performance of xylans derived in particular from alkaline

Processes and which are known to possess a lower degree of branching and

Have a higher molecular weight as compared to acid sulfite xylan.

Quite recently, residual chromophores in cellulose triacetate were isolated by

treating the cellulosic material with a boron trifluoride:acetate acid complex,

BF3.2HOAc, in the presence of small amounts of sodium sulfite. The identified

Structures of the compounds causing the yellowish appearance indicate that the

Formation pathways of chromophores involves thermal condensation of degraded

Cellulose or hemicellulose compounds to form aromatic condensation products

(primary chromophores such as 2,5-dihydroxybenzoquinone, o-dihydroxybenzene,

And others), self-condensation of acetic acid derivatives and the reaction of primary

chromophores with acetic acid [11].

The detailed mechanismof the preferred chromophore formation of pentoses over

Hexoses in both acidic and alkaline processing is, however, still under investigation.

Extractives, resins

Pulp resins, determined as acetone or dichloromethane (DCM) extractives, play


Дата добавления: 2015-10-21; просмотров: 77 | Нарушение авторских прав


Читайте в этой же книге: And density) as well as the fiber strength (dry and rewetted zero-span tensile | By the water retention value (WRV). The data in Tab. 11.1 indicate that the | Pulp Properties and Applications | The intrinsic viscosity as well as standard information from GPC measurements | Commercial hardwood and softwood kraft and sulfite pulps | The suitability of dissolving pulps can be adequately determined only by simulating | Chemical composition | Pulps. The former comprises the viscose and etherification processes, which | Product Simplified reaction scheme Raw material Pulping | Process, thus leading to inhomogeneously substituted cellulose which consequently |
<== предыдущая страница | следующая страница ==>
Processes. Acetate pulps are high-purity pulps containing hemicelluloses in| An ambivalent role in dissolving pulp processing. When exceeding a certain

mybiblioteka.su - 2015-2024 год. (0.007 сек.)